Gtco Super L III - Users Guide Bedienungsanleitung PDF herunterladen (Seite 25)

Super L III 25

Controlling the Alarm

There are five ways to toggle the alarm on or off and set the tone:

 Select the SuperSet Menu Alarm block (which toggles the alarm tone on and off).

 Use the following remote commands.

Controlling the Alarm Using Remote Commands

An alarm (audio tone) is provided so Super L III can inform you of certain conditions. The

alarm can be enabled or disabled by the SuperSet Menu or commands.

To hear only critical tones, turn the alarm off:

SuperSet Menu:

GTCO Commands:

Select the Alarm menu block – the fat left block showing a

speaker. Three medium length tones will be heard when

digitized.

Send command AD.

To hear all tones, turn the alarm on:

SuperSet Menu:

GTCO Commands:

Select the Alarm menu block. Three medium length tones will

be heard when digitized. Then, a tone will be heard each time

a transducer button is pressed.

Send command AE.

When you move the cursor over the Alarm block on the SuperSet Menu, the Proximity

indicator (green) will light if the alarm is currently enabled.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Keine Kommentare

Gtco Super L III - Users Guide Bedienungsanleitung Seite 25