Gtco MM II 1201 - Users Guide Bedienungsanleitung PDF herunterladen (Seite 36)

MM II 36

 Transducer identification: Command sends a character string to the host that

identifies which transducer (stylus or cursor) is attached to the tablet. The string is

one of the following:

CSR4<CR> Four button cursor

CSR16<CR> 16-button cursor

STYLUS<CR> Stylus

Section D: Reserved Commands

Do not use the ASCII commands zh, zd or zf or their equivalents. They are reserved for

factory use. If a reserved command is issued by mistake, clear it by repowering the tablet.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 60 61

Keine Kommentare

Gtco MM II 1201 - Users Guide Bedienungsanleitung Seite 36