Gtco MM II 1201 - Users Guide Bedienungsanleitung PDF herunterladen (Seite 24)

MM II 24

Axis Update Mode

Command Sequence: <mode command><update value>

ASCII command

mode command

update value

<SP> to z

Axis Update Mode is an adjunct to Remote Request, Stream and Switch Stream modes,

particularly useful if using a grid on the tablet and you want reports sectioning the grid

intersection points.

The points issued are:

Point

Report

Description

(0,0)

(10,0)

(10,10)

(20,10)

point is

(30,10)

(30,20)

Reference point, the first point collected in Axis Update Mode.

X update was met. Y was not. Last Y value repeated.

Y update was met. X was not. Last X value repeated.

X update was met. Y was not. Last Y value repeated.

issued between points 4 and 5 because the same report is not issued

consecutively.

X update was met. Y was not. Last Y value repeated.

Y update was met. X was not. Last X value repeated.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 60 61

Keine Kommentare

Gtco MM II 1201 - Users Guide Bedienungsanleitung Seite 24