Gtco MM II 1201 - Users Guide Bedienungsanleitung PDF herunterladen (Seite 31)

MM II 31

 Report Mode: Switch Stream

 Report Rate: maximum throughput

 Resolution: 500 lpi

 Tablet Identifier: 0

After the tablet receives the Reset command, there is a ten millisecond delay before it is

ready to receive further data from the host.

Send Configuration

Send Configuration issues a report to the host that identifies the resolution of each axis.

The report format is one of the following:

Key:

 LSB is the least significant bit. MSB is the most significant bit.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 60 61

Keine Kommentare

Gtco MM II 1201 - Users Guide Bedienungsanleitung Seite 31