Gtco DrawingBoard VI - Users Guide Bedienungsanleitung PDF herunterladen (Seite 6)

DrawingBoard VI 6

For an Optional Serial Installation

 Microsoft Windows 98, ME, NT 4.0, 2000, XP, Vista, 7 or 8

 One available RS-232C serial communication port (Serial signal levels must conform

to EIA RS-232C specifications)

 10 MB of free disk space

 Application software that directly accepts digitizer input via the computer’s RS-232C

serial port, or via the Wintab API or TabCon API

Overview

The DrawingBoard VI digitizer (large format shown here) consists of:

Active Area

The drawing area – Active Area – is the portion of the tablet surface designated for

digitizing. Its boundaries are marked at each corner by a right-angle crop mark on large

format tablets. On small format tablets, the Active Area is delineated by the overlay – not

including the menu.

1 2 3 4 5 6 7 8 9 10 11 ... 51 52

Keine Kommentare

Gtco DrawingBoard VI - Users Guide Bedienungsanleitung Seite 6