Gtco DrawingBoard VI - Users Guide Bedienungsanleitung PDF herunterladen (Seite 14)

DrawingBoard VI 14

The following table lists the tablet options used by the pre-programmed setups.

Default

Save 2

Save 3

Mode

Run

Track

Point

Baud Rate

9600

Data Bits

Parity

None

Odd

Even

Data Rate

125 pps

150 pps

125 pps

Resolution

1000 lpi

500 lpi

200 lpi

Output Format

Format 23

Format 30

Format 0

Emulation

GTCO TTech DP5

High Resolution

Binary

Summagraphics

MM 1201 Binary

CalComp 2000

ASCII

Selecting a Custom Setup

You can setup specific tablet options by turning different combinations of Configuration

keys ON or OFF. The available tablet options are listed below.

To setup the tablet:

1. Turn on Configuration Mode by clicking on the Config/Exit key.

2. Click on the Bank key where you need to work (A, B or C).

You can determine which bank you are in by placing the transducer over one

of the Bank keys. The Indicator light is on if the Bank is active.

3. Determine whether the Configuration keys are ON or OFF by placing the

transducer over each key. If the key is ON, the Indicator light is ON

4. Repeat steps 2 and 3 for the remaining Banks as required.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Gtco DrawingBoard VI - Users Guide Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Gtco DrawingBoard VI - Users Guide